About chris.george

chris.george · 12-27-2020

Has anyone out there got any good ideas or experiences with alternative NACs instead of ISE?Has anyone wished they had never used ISE and used another solution instead?I am starting from scratch in terms of finding a NAC solution and wonder if ISE is...

chris.george · 06-22-2018

I would like to optimise our existing core to floor infrastructure: We have 4 floors altogether with rougly 4x 48 port switches per floor. Each floor has its only dedicated fibre link direct to the Core switch in our Data Centre (some 10Gb and some...

chris.george · 05-12-2011

I am using the Cisco SF302 switches as a connection to some wireless devices that will link two buildings together.In this configuration: Cisco 3570 in building 1 >> Cisco SF302 >> building 1 wireless bridge >> building 2 wireless bridge >> Cisco SF3...

chris.george · 10-31-2018

The SF220 does not have this command despite reading the online documentation suggesting it should do

chris.george · 07-17-2018

OK so other than that are we looking OK? Is there a better way of doing this? In my scenario there would be the one central L3 core switch into which the 16 layer 2 switches connect to, each with a different 10.10.120 management address. Thanks again...

chris.george · 07-16-2018

OK I've got it to working with this config but this config has it's limitations - is this what you were expecting?: Layer 2 switch config vlan 22 name WORKSTATIONS!vlan 120 name MANAGEMENT!vlan 802 name NATIVE-VLAN! interface GigabitEthernet1/...

chris.george · 07-16-2018

I'm going to rig up a simple test lab just using 2 switches - a L3 switch and L2 switch and see if it works as you describe ...

chris.george · 07-13-2018

Yes the core switch is Layer 3 and there is Connected routes between vlan 20 and vlan 22 - but when I only allow vlan 22 on the layer 2 edge switch I cannot ping servers on vlan 20 on the core switch - why would that be then?

Member Since	‎05-12-2011 02:33 PM
Date Last Visited	‎01-03-2021 09:31 AM
Posts	18

User Statistics

User Activity

Alternatives to Cisco ISE?

Can you check this infrastructure configuration will work from Floor to Core?

How do you dumb down a small business SF300 to a transparent bridge?

Re: I have the SG220-26 switch

Re: Can you check this infrastructure configuration will work from Floor to Core?

Re: Can you check this infrastructure configuration will work from Floor to Core?

Re: Can you check this infrastructure configuration will work from Floor to Core?

Re: Can you check this infrastructure configuration will work from Floor to Core?