Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is a very strange problem. We have a user that forwards their phone to a cell phone. Call comes into the Cisco over FXO and transfers out over FXO to a cell phone. After the forward, if they pick up the incoming call on their cell phone, ever...
Meetme conferecing worked perfect before the upgrade to 8.1. The site is on a SIP trunk for phone service. We have a DID setup to ring to the meetme conference number. When I call from our office using a SIP trunk from the same provider, it works ...
I tried to turn off registration on the FXS ports but they are still registering with the SIP provider.ephone-dn 17 dual-line number 301 no-reg both label 301 description 301 name 301They are not user phones so they do not show up as ephones if tha...
We are having a problem where the calling party hears a loud static noise when transferred. It occurs right after the transferring party hangs up. You can hear the called party talking behind the static. It lasts only for a couple of seconds.Call ...
A site wants all MWIs turned off. A cisco tech gave me this command to run from CUE CLI:ccn application ciscomwiapplication aano enabledendAll of the MWIs are turned off on all phones except for one. Even if the user has no voicemails, the phone st...
The SPA8000 was pretty easy to setup using the instructions found on this site. You have to program it using CLI is the only problem but all you really need to do is cut and paste from the document.
I got this email from Adam Compton on 5/6/2011.'In my eyes, right now 7.4.7 is the most stable version for the SPA525 phones.'Another case I am working on, the tech said to load 7.4.4 for 525G and 7.4.6 for 525G2. Maybe those two are reversed. This...
We have had pretty good success with Nexvortex. The support has been good. The sales reps have been helpful. Lately, we have been having some quality issues but I am not sure if it is the Cisco box, ISP, or Nexvortex.
