Hi  I am trying to connect a Cisco 9120AX model AP to controller model 5520.Software version of the Wireless Controller is 8.2.151 Software version of the Access Point is 8.10.130.0  Does the AP image needs to be the same as controller ? Regards,Vish

Hi Guys,  I am not able to communicate from PC1 to PC2 on a Routed network, Topology attached. PC1 is on VLAN21 and PC2 is on VLAN22 , both ports are configured as access ports and allowed VLAN 21 and 22  Could someone please check and update where i...

Hi Guys, I am trying to configure a Fiber port in FPR-2100 series but the lights on the port is not turning green, it stays amber all the time.- I have connected a SFP to the port and connected a cable from the Fiber port to the switch but the light ...

Hi Guys,  I am having an issue with my FPR-2100 series firewall, running ASA 9.12(2) software in it but unable to create a port channel.There is no option under int F1/3 or any interface to create a port channel.  Any reason why or any recommendation...