Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have two stacked 3750 switches, each with a 10G module. The stack keeps generating the following log:"%PLATFORM_SM10G-6-LINK_UP: The FRULink 10G Service Module (C3KX-SM-10G) communication has been established."I’m not sure which switch the i...
Hi,We have three switches in our network: two C9300 switches and one 2960CX, as shown in the topology. The following observations and issues have been noted:Ping Results:Ping is successful between the switches.Ping is successful from the client host ...
Hello,1.I have cisco SG200, try to create two vlans(701,801), two interfaces GE port are defined as access on each, and GE25 defined as Trunk vlan allowed two vlans.on the other hand, there's a cisco catalyst 3560G, two vlans already exist on it, Gig...
Hello,As below topology, end devices pings each other, but cant ping to vlan ip on Remote Switch(192.168.17.5), although i can ping this vlan ip from CORE switch! -vlan 100 (192.168.12.1) on CORE SW.-vlan 20 (192.168.17.1 ) on CORE SW. -vlan 20 (192....
Hello,I have two Cisco 861 in different places connected to internet with fixed public IP, i wanna to make an encrypted tunnel between two routers to send and receive multicast traffic, knowing there's ping succeeded between 192.168.3.0 and 192.168.1...
It is more accurate for me to say that there are two messages appearing on syslog. The first one is:%PLATFORM_SM10G-3-NO_RESPONSE: The FRULink 10G Service Module (C3KX-SM-10G) is not responding.And the second one comes immediately after:%PLATFORM_SM1...
Thanks for your reply, what’s details do you know? i am ready to provide any unclear details.knowing that, the same topology on another place (c3850 and 2960cx) is working fine without any static route or default gateway on remote switch.something mi...
Simply, How can i do below task on SG200 step by step please?1.create vlan 2 and vlan 3.2.GE 1 : access port to valn 2.3.GE 2 : access port to vlan 3.4.GE 25: Trunk port allowed vlan 2,3.Thanks in advance
