Ping from PC01 to PC02 successfully, but no ping from PC01 to vlan ip address itself!

[FayezIllariyeh]

Hello,
As below topology, end devices pings each other, but cant ping to vlan ip on Remote Switch(192.168.17.5), although i can ping this vlan ip from CORE switch!

-vlan 100 (192.168.12.1) on CORE SW.
-vlan 20 (192.168.17.1 ) on CORE SW.

-vlan 20 (192.168.17.5) on Remote Sw.

-VTP is active and all vlan exist on all switches.

-PC01 (192.168.12.15) (GW:192.168.12.1)
-PC02 (192.168.17.10) (GW: 192.168.17.1)

i cant find where is the problem? 
help me please,,,

[balaji.bandi]

your picture is too blur not able read correctly

where is all the Gateway resides in Core Switch ? is ip routing enabled ?

From Core switch you able to ping desired ping ?

[Giuseppe Larosa · Accepted solution]

Hello @FayezIllariyeh ,

you have ip routing enabled on the remote switch

so on the remote switch you need a static default route pointing to core IP address in Vlan 20

ip route 0.0.0.0 0.0.0.0 192.168.17.1

it is important that the next-hop is on a directly connected subnet.

Hope to help

Giuseppe

[balaji.bandi]

on the remote swith add default route point to 192.168.17.1 and test.