Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
To All, I have newly acquired a Cisco 2940 Switch and I am currently using an 837 Router (Which I have now connected the Router onto my Sever) and I have connected an ethernet cable to the Switch (1x Port) from the Router (Ethernet 1 Port)...
To All,I am now using my 837 Router on my new Server and I have only made one change to the Global configuation mode, please veiw the input below:ip dhcp pool DLSRnetwork 10.10.10.1 255.255.255.0default-router 10.10.10.1dns-server 10.10.10.2(Note* I ...
To All, I have recently installed SDM in order to access the internet with my 837 ADSL. I have configured the router's ethernet interface with ip address 10.10.10.1/24 (Default Gateway) and my PC to 10.10.10.2/24, I can both ping & telnet to the rou...
To All, I am having an issue attempting to connect to my ISP Bt Internet (ISP Provider in UK) I have copy/pasted the input from show running-config, please view the input and please point out to me of anything incorrect? Router#show run Building...
I have recently purchased a Cisco NM-T4 Serial Module for my 3620 Router and everything is A-Okay, but I have attmpted to remove the command "serial restart-delay 0" from all the serial interfaces by using "no serial restart-delay 0" command and save...
John Blakley,In relatiion to the DHCP on my 837, here is an extract for your further information:ip dhcp use vrf connected!ip dhcp pool DLSRnetwork 10.10.10.0 255.255.255.0default-router 10.10.10.1dns-server 10.10.10.1Bob.
Cadet Alain,As I have moved and connected up my 837 Router onto my new Server (Which is running Win 2003 Server OS) and for this I must completely remove DHCP from the router??And for this, my Workstations are now Clients and I am using Static IP Adr...
Cadet Alain,Please find pasted my current NAT configs for your further information:ip nat inside source list 1 interface Dialer0 overload!access-list 1 permit 10.10.10.0 0.0.0.255Regards,Bob.
