Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5505 and 5510, both running 8.2.5. Is it possible to configure these things to redirect all HTTP traffic to Websense Cloud Web Security? I know you can do it if you have an internal websense appliance, but I can't figure out how to ge...
Hi,I hope this is the right place to post this question....I currently have an ASA5510 (software version 8.2.5) which I'm using as my firwall and vpn. I have an ipsec tunnel between my office and our HQ office. The ASA is also serving as client ...
I'm using Secure ACS 5.3 and a WLC (WLC is running software version 7.3.101.0) to authenticate wireless clients (authenticating via PEAP).The client machines are running Windows7 and AnyConnect 3.1 NAM.The authentication is configured for machine and...
Yes this is EXTREMELY helpful. I was stuck for a couple days trying to figure out why my NAM deployments weren't working. This provided the answers. Thanks!!
The way I did it, I didn't use an anchor controller...forgot to mention that. I only have one 2504 controller. Of course setting up an anchor is better if you've got one.One question:The guest traffic will be encapsulated in CAPWAP, thus putting th...
Here's how I did it.I have a 2504 WLC and an ASA 5510.I dedicated one port on the WLC to the guest WLAN, and plugged that port directly into the DMZ interface on my ASA (for security reasons, make sure there is nothing else using this DMZ...only your...