Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am using a Cisco ASA5540 firewall, and I would like to know which VPN solution would be the ideal choice for using RDP to remove into a Windows 2019 Server. There are three different types under the VPN Wizard, in the ADSM, and I am not sure which...
I currently have the following ACL. I am unable to ping any server at any external/public IP. I am not sure why.How would I go about fixing this? Thank you very much! access-list outside_access_in extended deny ip 51.222.38.0 255.255.255.0 any4acc...
Yesterday, a very strange incident occurred, which led to the partial loss of my ASA5540 configuration. The building in which our servers are housed, suffered a power outage of some type, and when the power came back on, and the ASA5540 rebooted, it...
Hello Cisco Community, I know this must be very simple, but I am having trouble getting this working. I was wondering how I could go about creating a Network object group, and then editing it from time-to-time to add new IP addresses to Deny from ou...
I read up on this forum on how IPs should be blocked on our ASA 55xx firewall, and I added the following lines to the configuration: access-list outside_access_in extended deny ip host 65.xxx.xxx.0 anyaccess-list outside_access_in extended deny ip ho...
Okay, so I am having some additional issues with the implementation of VPN on our Cisco 5540 firewall. I tried to locate and download the AnyConnect client for the Windows 10 desktop computers, and I found that there is something offered by Microsof...
Hello Colby, I tried your suggestion and many other combinations, and nothing except the following kept working (for ALL hosts): access-list outside_access_in extended permit icmp any any I kept trying to use your examples, but could not figure out ...
How is the ACL modified to allow pings to just a specific server?Also, do you know if there is a rate limiter somewhere that I can use to limit the amount of times an IP can be blocked and then SHUNNED, or something.I have an IP that is nailing our n...
Hello John, It appears that I have 10 AnyConnect Premium Peers, so this is plenty for us: ciscoasa5540(config)# show versionCisco Adaptive Security Appliance Software Version 9.1(7)32Device Manager Version 7.8(2)151Compiled on Tue 04-Sep-18 08:37 by...
Hello Colby, Thank you for all of your suggestions. I found that I could not change the existing configuration line from "echo-reply" to "echo request." I would receive an error, pointing at the word "request." So, I used the ASDM to "+Add" a new ...
