About ben

ben · 09-16-2016

Is there a way to stop a running event? I would reload the router in case of connectivity issues, but give you the chance to stop the reload if you're working on it. fe: event manager applet Reload-on-vpn-failure event track 33 state down acti...

ben · 08-13-2014

For the moment, i've got site A up and running concerning Wireless.The idea is that we've got 2 SSID's. One for internal users, and one for guests.This is working great. We look like now to prolong this setup to our second site. This site is already ...

ben · 05-18-2011

Hey,I've installed a cisco switch 3550 in my network.No i wanted to connect a playstation 3 system to this. These systems (should) have a gig port. But this goes wrong.When i connect the ps3 to the switch port: no network cable connectedWhen i connec...

ben · 03-24-2011

Hey,We're using cacti for some monitoring tools. And i can easy get graphs for the Active NAT translations.But we would like to have also a view on the allocated ip's for a nat pool. Is there an OID for this? Or do you've got an idea how we can check...

ben · 09-18-2016

Thanks already for your response, I'll try it today! Didn't know the 'cli pattern' event. Open doors for extra stuff. ;) You wrote about the maxrun, where can/must I change this? It's not a (clear) action... :$

ben · 09-10-2014

Sorry for the very late response. I was away for a few weeks... :$It seems to work (a bit, got a problem with the image version). The AP is seeing the WLC now.One thing I had to change was to updated my DNS server with the host: "CISCO-CAPWAP-CONTROL...

ben · 08-13-2014

The SSID's on the second can/may be different that the current ones....

ben · 05-29-2011

I can confirm that it's not a cable issue. When i put a SFP module in the switch, it connects perfectly on 1GB. Full auto.When i now connect the cable (the exact same one) now to a "normal" gigabit port, it fails, it goes to 100MB.Any idea what the d...

ben · 05-25-2011

I've did some tests with a FLUKE cable tester from my work, and all tests came back positive.When i now connect the patchcable instead of into the cisco switch, into my providers router (build in 4 switch port), the PS3 connects to 1GB. Since it's no...

Member Since	‎12-22-2008 12:31 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	13

User Statistics

User Activity

Stop running event (manager)

AP connection with WLC on remote site

Portsettings for a PS3

Cacti & Allocated IP NAT Pools

Thanks already for your

Sorry for the very late

The SSID's on the second can

Re: Portsettings for a PS3

Re: Portsettings for a PS3