About Daniel Perez

Daniel Perez · 06-16-2017

I have a C3560 switch that is internet facing.It serves a very limited scope sitting between my routers and the ISP broadband connection.Cisco recommended this model to the ISP as the best choice for this particular application.It has been configure...

Daniel Perez · 06-05-2011

Please help. Thank you for looking into this problem. This is for a Cisco 851WThis is a somewhat newb question and I am reluctant to find out how easy this fix is but I have spent countless hours trying different config setups and I just cant seem...

Daniel Perez · 02-12-2011

I have been trying to get my 851W to work with DDNS for a long while now. In fact I walked away from the problem in frustration and loaded DDClient on a Linux box until I had time to re-visit this. The folks at ZoneEdit were not able to offer much he...

Daniel Perez · 02-01-2011

I have looked up the command sequence for port mirroring and it seems pretty straight forward however in my case the command will not execute.I have a 851W with 12.4TIf I do:#monitor session 1 source interface fa 4 (wan port)i get the response i...

Daniel Perez · 06-16-2017

So the only way "in" is console? Which is OPEN? When you say "console which is open" are we talking about the physical console port on the switch? If that is what you mean, then yes, I want the only method to contact this switch is to be via a b...

Daniel Perez · 06-16-2017

Thanks for the reply. I thought Telnet was disabled when "transport input none" is invoked. Is there another method? Also isn't VLAN1 the default vlan that couples the few ports that I do have active? I did not establish a password with "enable passw...

Daniel Perez · 06-07-2011

After some thought, why couldn't I use "tcp any host 192.168.1.60 eq www"? Wouldn't that close the scope on that ACL?

Daniel Perez · 06-06-2011

Giuseppe:I tried it again and it worked this time. I know I tried this same combination before but here is where my snag is.If I try to access www.mysite.com from inside the lan it will not work. If I do it from a completely different network it reso...

Daniel Perez · 06-06-2011

Sorry for the duplicate post. I put my initial response in the wrong place.Thank you everyone for your responses. I always find good information on this forum.Giuseppe:I tried it again and it worked this time. I know I tried that same ACL combination...

Member Since	‎02-01-2011 10:01 AM
Date Last Visited	‎10-07-2024 11:28 AM
Posts	16

User Statistics

User Activity

I want to make my C3560 switch as simplified as possible with security in mind.

Cannot get to my web server. How to format my ACL?

DDNS updates produce name resolution errors.

Port mirroring on WAN for Cisco 851W

So the only way "in" is

Thanks for the reply.

Re: Cannot get to my web server. How to format my ACL?

Re: Cannot get to my web server. How to format my ACL?

Re: Cannot get to my web server. How to format my ACL?