Hello all,I have a UC560 that is running well. I am trying to add a new type of phone (CP_524G)  to the system but cant get the cp524G phone to register. The new phone picks up a correct IP, VLan and TFTP server ok. The "Call Control Protocol" on the...

HI all,I have been unable to use POE from my 2960-s switches to power my Cisco 1252 WAPs.  "Show power inline" reports  the power as15.4 Watts, "Ieee PD" Device and Class "3". 1252s need about 20 Watts and the command shows 30 Watts Max is available....