Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello: I have L2TP working for several admin users for our system into an ISR4431 using Windows10 client and a heavily modified L2TP over IPSec profile and it works perfectly.What I would like to do is assign a specific IP address to a specific user ...
Hello All:The telco at our site has a fiber NTU/router and we are connecting the ISR4431 gig0/0/0 to this device.When we use a laptop and statically assign the IP address, the laptop works fine and can ping, with its "don't fragment" option set to a ...
Hi All: I have a strange issue in my office.My strongswan VPN client on my laptop works fine to connect to a customer's site from home or from hotels but in my office it does not. Its comes up and says its connected but I cannot ping any hosts at the...
Hi All: Here is my platform:cisco ISR4431/K9 (1RU) processor with 1694893K/6147K bytes of memory.Processor board ID FGL2404LMN64 Gigabit Ethernet interfaces32768K bytes of non-volatile configuration memory.4194304K bytes of physical memory.6598655K b...
Hi Aref: Ok, interesting idea. In fact, the 4431 is on the internet so it has no requirement for NAT-t on its end but the remote sites are all behind Telco/ISP NAT gateways so obviously they require it. How can I turn of NAT-T on the Cisco end but st...
Hi Everyone:I am now running:Cisco IOS XE Software, Version 16.12.04Cisco IOS Software [Gibraltar], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.12.4, RELEASE SOFTWARE (fc5)Technical Support: http://www.cisco.com/techsupportCopyright (c...
Ok, problems improved but not eliminated in either the group is dpd disabled in both directions or those just in one direction.Dealer finally got me the IOS, just waiting for the hash key so I can check it. Cheers,john
