About dev.puniya

dev.puniya · 10-27-2022

Hello There,I am trying to explore an option of setting up multiple continental DMVPN HUBs and each spoke router in that continent will talk to a local DMVPN HUb. However, I am skeptical about the following - How will be the HUB-to-HUB communication?...

dev.puniya · 06-13-2020

I am trying to apply PBR on vlan 1 and 2 to reroute traffic for the specified host. However, the following errors are seen in the log message. Can someone advise a way to apply pbr on the C9500 L3 switch? The idea here is to pass all the internet an...

dev.puniya · 10-27-2022

Hi MHM,It is not just a typical HUB and SPOKE topology, currently, I have active/passive tunnels but this is a little different than what you just described. Thank you for your response.

dev.puniya · 06-14-2020

The issue was with the recursive command, I removed it and it's accepted by under the VLAN. Thank you all for your help!

dev.puniya · 06-14-2020

Thanks all for your response- Here are the additional information ------------------------------------------------------------------------------Technology-package Technology-packageCurrent Type Next reboot--------------------------------------------...

dev.puniya · 06-13-2020

logs- 003593: UTC: %FMANRP_PBR-3-UNSUPPORTED_RMAP: Route-map INTERNET_TEST has unsupported options for Policy-Based Routing. It has been removed from the interface, if applied.003594: UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User: logged command:ip policy ro...

Member Since	‎09-16-2019 02:32 AM
Date Last Visited	‎11-02-2022 12:52 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

Multiple continental DMVPN HUB and spoke topology

Unable to set PBR on a vlan ..Running Cisco IOS XE code on C9500-16X

Re: Multiple continental DMVPN HUB and spoke topology

Re: Unable to set PBR on a vlan ..Running Cisco IOS XE code on C9500-1

Re: Unable to set PBR on a vlan ..Running Cisco IOS XE code on C9500-1

Re: Unable to set PBR on a vlan ..Running Cisco IOS XE code on C9500-1