About Naresh Murali

Naresh Murali · 02-24-2021

Hi, GLC-LH-SM is not supported for the C9300-NM-4G SMD is supported. However if it is SM then it is not supported as the compatibility Matrix Please find the attached snapshot for the same. You can use any supported SFP's. Hope this helps. ...

Naresh Murali · 02-23-2021

Hi nicanor00, Can you confirm if the SFP model is GLC-LH-SM or GLC-LH-SMD? Also provide the version which is running and the complete error which you are getting. Regards Naresh M

Naresh Murali · 02-23-2021

Hi Carlo, In the output you will not have the .bin file. Hence we can know about what version installed in the current package.conf. With respect to MD5 in case if the MD5 is not same as the .bin file then it would have not installed the package...

Naresh Murali · 02-23-2021

Hello CarloSalvador, Try to use the below command to see what image running on the package.conf. # More flash:package.conf Hope this helps. Regards Naresh M

Naresh Murali · 07-15-2020

Hi @roman.campos , Power off the switch and power on. Then press the mode button continuously. It should go to the ROMMON and then we can recover using USB method. In case if you are not able to go into ROMMON method, please share the session logs ...

Member Since	‎04-05-2016 05:58 AM
Date Last Visited	‎12-10-2024 12:11 AM
Posts	27
Total Helpful Votes Received	25

User Statistics

User Activity

Re: GLC-LH-SM PM-4-ERR_DISABLE on C9300-24T

Re: GLC-LH-SM PM-4-ERR_DISABLE on C9300-24T

Re: How to know which specific IOS Image (.bin) file has been uploaded to the Flash

Re: How to know which specific IOS Image (.bin) file has been uploaded to the Flash

Re: Switch 3850 no Boot, the mode botton no respond