We have IOSXR 4.2.1 on routers CRS3 and ASR9K with all recomended SMUs; we need to configure the time synchronization for two NTP servers with the configuration below, but the routers became unstable; synchronize with one NTP servers for some time, t...
we have a working ipsec configuration on ios! crypto keyring KRING pre-shared-key hostname BA2211RA1.ba.caixa key SeCretBA2211RA1 pre-shared-key hostname BA3618RA1.ba.caixa key SeCretBA3618RA1 ! crypto isakmp policy 1 encr 3d...
We have two 6k5 configured as vss and it is working fine. For each floor we have a 3750 stack. In each 3750 stack we have 4 switches. From the first 3750 we have a fiber link to the first 6k5 and from the fourth switch we have another fiber link to t...
we are configuring a ras on 3925 router with e1 controller. when we connect the e1 controller to pbx we got on pbx a no frame alarm (detailed error is that we have nfas but we do not have cas). what could be the error? do the router need dsp to hav...
Alexander, we tryied to use the ntpv3 but it do not worked. We have a TAC case and she thinks that could be CSCtd77162, but in this bug description the NTP server need to be with some inconsistency; we already checked on NTP servers administrators a...
Alexander, thanks a lot for your help, but in the link http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/general/release/notes/reln_a9k_421.html we can read that there is support for ipsec on ASR9K-px and do not have on ASR9K-p; is...
Thanks Alexander, the customer is trying to configure ipsec on ASR9010 running IOSXR (it is for a service provider, with vrf, BGP,etc); it is already working with IOS on another equipment; What is strange is that the IOSXR have the commands (we did ...
Michel, thanks, do you have any documentation about differences between IPSEC on IOS and IOSXR? Do you have any documentation about GETVPN on IOSXR, for example?
Alexander, thanks, but there is a lot of documentation about ipsec on XR (like http://www.cisco.com/en/US/docs/routers/asr9000/software/security/command/reference/srasr9kipsc.html)
