ZOMG , I have been seaching the GUI for this ALL DAY ! - works from the CLI perfectly - even reports the one it finds and enables. My Questions is - why does it turn them off in the first place ????????? Thanks , Josh ... View more

Sorry , I forgot to mention:- C3750X-48T - SFP-10GBase-LRM <====> SFP-10GBase-LRM - C2960S-24TD-L c3750e-universalk9-mz.122-55.SE3                                                     c2960s-universalk9-mz.150-2.SE                                                                     And this is working... But I am bringing all my 3750's up to 15.0.2 - but can not do my 6509's as fast.... This document mentions:-  (so why no talk ??) 10GBASE-LRM SFP+ transceiver module for MMF and SMF, 1310-nm wavelength, LC duplex connector 10GBASE-LX4 X2 transceiver module for MMF, 1310-nm wavelength, SC duplex connector there are X2-10G-LRM for my 16 port 6509 10G , but no mention of them in Xenpac  ... View more

Hello , I have exactly the same problem , but am unsure of the process using 'dd' I have another FWSM in another 6509 and it is working fine. but on either 6509 - when i type:- show boot device - the responce is:-  Firewall Module [Mod: 9]: no mention of cf:5 like i have seen in other posts....  Help Please  ... View more

OK , for me is was a classic noob mistake - wrong password..... The GUI passwords and the CLI passwords are in now way linked at any level ! but , this works http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.0/command/reference/CLIappA.html#wp1208469 A command in the CLI to reset the GUI ACSAdmin user's password to 'default' (as in the word default , not some bizard default value) ... View more

I have exactly the same Problem !!!    (Version : 5.1.0.44) I can Console and SSH with multiple local admin users - but no matter who i try - no HTTPS access.... ... View more

this is what I use at home - goes well!! ========================================= version 12.2 no parser cache no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname !!your user name!! ! logging rate-limit console 10 except errors enable secret !!your password!! ! username !!the other end!! password !!your password!! ip subnet-zero ip domain-name !!your Domain!! ip name-server !!your Name Server!! ip dhcp excluded-address 192.168.111.1 192.168.111.100 ! ip dhcp pool 1 network 192.168.111.0 255.255.255.0 domain-name !!as above!! default-router 192.168.111.1 dns-server !!as above!! lease 0 1 ! chat-script dialup "" "AT Z" OK "ATDT \T" TIMEOUT 50 CONNECT ! ! interface Ethernet0 ip address 192.168.111.1 255.255.255.0 ip nat inside ! interface Serial0 physical-layer async ip address negotiated ip access-group InFilter in ip access-group OutFilter out ip nat outside encapsulation ppp ip tcp header-compression passive no ip mroute-cache dialer in-band dialer idle-timeout 2147483 dialer string !!the phone number of your ISP!! dialer-group 1 async dynamic address async mode dedicated no peer default ip address ppp authentication chap ! ip nat inside source list 1 interface Serial0 overload no ip classless ip route 0.0.0.0 0.0.0.0 Serial0 no ip http server ! ! ip access-list extended InFilter evaluate IntTraffic ip access-list extended OutFilter permit ip any any reflect IntTraffic access-list 1 permit 192.168.111.0 0.0.0.255 dialer-list 1 protocol ip permit ! ! banner login ^C !! Your Banner !! ^C ! line con 0 logging synchronous line 1 exec-timeout 0 0 script dialer dialup modem InOut transport input all escape-character 93 stopbits 1 speed 115200 flowcontrol hardware line vty 0 4 exec-timeout 20 0 password <> login ! end ===================================== Hope this helps , Josh ... View more