Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I need to configure the ACS 5.1 to meet the following requirement :-1. ACS 5.1 will point to a RSA SecurID as the first authentication mechanism for the validation of user credential2. In the event that RSA SecurID is not reachable, the ACS 5.1 sh...
Hi,Understand that AIP-SSM doesn't support email alert, may i know what are the alert option that I can configure in order to receive notification when a severity 1 event had been detected?regards
Hi,If I wish to enable IPS and firewall functions in a single ASA 5540 (deploy behind a internet router), may I know which function will serve first, or is it up to us to configure?regards
Hi,Need some advise out there. Currently I am using a Oydessey Radius to perform the authentication and the vlan assignment. From the Cisco websites, I knew that I need to set the tunnel-type, tunnel-medium and the tunnel-private-id on my radius attr...
This is the reply from the TAC engineer, "> I believe that you are hitting this bug: > http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method > =fetchBugDetails&bugId=CSCtl05416 > While the notes for this bug talk about problems wi...
Hi,Are you aware of this bug :http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl05416which could be relared to my problem?regards
It is indeed quite strange.I found one old thread that was quite similar to my problem :https://supportforums.cisco.com/thread/2052480I tried out the setting, but the problem still persist. Besides the sequence setting, Is there any setting that indi...
