Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a pair of 5520s with the LAN/STATE interface on a Gi0/2. Some hoser configured the interfaces as 100/full and connected them to 100/full 100M switchports. You evidently can't change the ASA interfaces with failover enabled. Is there an easy wa...
OK, in the process of doing a password recovery I somehow renamed config.text to "?"As predicted, when I try to rename this back to config.text I get no further thanswitch# rename flash:?at which time IOS is kind enough to help me out by spilling out...
Can anyone recommend sources of Cisco IPS best practice documentation? This product seems to be one of the few Cisco products without a legion of 3rd-party/Cisco Press books.
The answer seems obvious, but do these "Actions Taken" mean? denyPacketRequestedNotPerformed, denyFlowRequestedNotPerformedWhy would a requested action not be performed?
I'm starting to set up ARC and tried getting the host key from the ASA-5520 it's in but got an undocumented error:IPS(config)# ssh host-key 10.0.0.50Error: getHostSshKey : Unsupported remote protocol version (2.0)Can it be true that the IPS doesn't s...
This sounds similar to something we've seen on MR16s & MR18s. It has some correlation with channel changes. Take a look at the RF tab on the AP. You'll likely see a normal traffic pattern followed by an AutoRF/DFS channel change followed by a flatlin...
We weren't given a bug number by support but they said it was a known issue. It extends a couple of revs back. Only on MR32s (150) out of our 750+ total.
We weren't given a number but were told that it's a known issue.The network is unusable when connected to an MR32. A continuous ping of the local gateway from a device associated to an affected AP shows a pattern of: no responses and high 20 second r...
