Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,I have a downstream customer who has requested that we implement communities. We've never had a request for them so we just never set them up... He is multi-homed. one connection to us and one connection to Provider X.As I see it, I can provide h...
Hi all,We're connecting two aggregation routers together using zx optics to one of the ports on each 7206's G1 Card. The connection is across about 25 miles or so of dark fiber.When first plugged in there was no love on either end, ok that's fine, so...
Hi all, I wanted to run this by someone to see if they had an easy answer. We fixed the problem but we'd like to know why it was an issue.The ring in questions is a 8 node MPLS ring using 3750MEs. There is a head-end switch where clients around the r...
Hi all.We have an ML-1000 card in one our 454 shelves that we can't log in to by either telnet or using CTC.When we attempt to log in, the screen displays the Username prompt three times and then gives us an EID-1023 Session has been terminated error...
To add to this.I do see the VPN connection establish on the ASDM Log window, but I do not see any log messages when I attempt to ping or access a device from the faulty connection. From the 1 working connection, I do.It's almost like the info is bein...
To amend this a little. I have input. I was able to confirm that the unit received my requests. It provides no display to me though. I altered the config to:transport input allso it now reads:line con 0 stopbits 1Thanks
I transfered up the release that you recommended but I got the same results. I'll attach the log. The current IOS on the IAD is was but in back in 2002, it's release c2430-ik9o3s-mz.123-14.T5.bin.Maybe something is corrupt on the box itself?
