Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I currently have 2 AIR-AP1562I-B-K9 APs in my Cisco 5520 WLC that show "PoE/Medium Power (25.5 W)" under PoE status. Pretty sure this is due to a PoE injector issue, but my question is, what effect does the AP running at this power level have? ...
Hello All, I have little to no experience with ACLs, and have a task I am trying to complete. I have two networks that I am looking to segment, VLANs 229 and 230. Here is the interface configurations on my router:interface GigabitEthernet0/0/0.229enc...
Hello, Having serious issues trying to get ACLs to function on my Cisco ISR. I have no experience with this so any help/input is appreciated. Using a router on a stick setup here.Essentially my goal is allow 2 VLANs (229 & 230) to talk to eachother, ...
Leo, I appreciate your help and response.My wireless knowledge on that level isn't really there, I don't have a solid grasp on the concept of spacial streams.Does this have a large impact on performance?
Unfortunately I only am able to test this on Sunday's, as these networks are for automated production systems that run 24/6 . I will provide an update then, sorry for the delay!
Hello. I had stated in a previous post, the ACL isn't applied at the moment because it didn't work during my testing period, and this is for a production environment. Thanks for your help !
Hello, Thanks for the help! I was under the impression that Cisco ACLs had an implicit deny at the end , is that not correct?Also it is removed from the interface at the moment, as it wasn't working as intended during maintenance period.
