Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
if my environment got a few hundreds of AP tat take v long time to upgrade.can i just ssh w my laptop to the controller to initiate the rolling upgrade after pre-download image, d/c my laptop go home sleep?will the controller run thru the entire upgr...
hi,deployed wifi 5 network in an v open area indoor. notice mostly or all of the APs all transmit power at Level 7/7 or 8/8.newer laptop devices with strong wifi AX mostly no issue; but a few older wifi clients like Omron mobile industrial robot alwa...
good day.i work in an org where my wifi authentication is centralized and outsourced.i encounter an issue where external contractor managing this ISE server keep reporting they received excessive ise-auth alarms from the C9800 wlc i am managing.the f...
hi,if i have a policy tag "buildingA-policy-tag" w the following wlan + policy profiles apply to 200 APs>>HR wlan profile + HR policy profileMGMT wlan profile + mgmt policy profileIT wlan profile + IT policy profile.Question - if i then make minor ch...
Cisco new AP keep promise increase channel bw.. but... in 2025, are most enterprise wifi networks already utilizing on 160mhz already??my organization still keep at 40mhz channel wide to prevent compatibility issue.. :S
my understanding ...step 2 >>> launch rolling ap upgrade. # ap image upgrade destination wlc2 wlc2ipbatch of AP start reboot and join wlc2 and boot up as 17.15.5.from what i read ... after all the APs are on wlc2. the process will stop waiting for th...
i m damm confused now after seeing your explanation.my wlc is on 17.9.x. i read that 17.9.6 is not affected by this "AP partition full" issue; only those AP which was upgraded to 17.12.x does. also, we are trying to minimize disruption, so reboot few...
17.9.x to 17.15.xi though that after i initiate the ap rolling upgrade, all the ap will reboot and join the N+1 controller which already activated/commited, and the primary controller (17.9.x) w 0 ap now, it's activation havn't invoke and can wait ti...
yes... the AP are to close together tat why they see each other and tone down the transmit power..but the thing is, can i see this as a client issue since newer client like ac/ ax all OK...?
