Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have told from distribution that ANT2544V4M-R= antenna is end of life but i wasn't aware of it.
Is ANT2544V4M-R= antenna end of life? If it is end life what is the replacement Antenna?
Thanks,
Kumaran
I recently bought an 2702E IOS AP and configured one SSID for 2.4Ghz/5Ghz radio for site survey purpose. I was able to connect with 2.4 but not with 5 Ghz radio, 5 Ghz radio keep going to "Scanner" mode anyone know why? i have disabled 5 Ghz radio an...
Hello everyone,
I always thought we need two WLAN controllers for reliable connectivity just in case one controller goes down APs can join the second controller (backup). one of Cisco expert mention that no need for two controllers after APs connect ...
I'm looking for hardware configuration (specification) for Aironet 2700 serious access point. Based on the data sheet both configurations are for controller based not for IOS.
AIR-AP2702I-UXK9: Dual-band, controller-based 802.11a/g/n/ac ( i thought t...
Hi Guys,I will need to configure IOS (standalone) 2602E as access point as wireless bridge. When I try to disable 3 out of 4 antenna ports (only enable A) for wireless birding it won’t save I get white screen but if make changes on rest the setting I...
Yes it is universal AP and i have already changed to autonomous mode. Both radios are on but clients are only connect to 2.4 Ghz radio but not with 5 Ghz. As soon i disabled 2.4GHz on the client device disconnect it won't connect to 5 Ghz radio.
Thanks Leo.
FlexConnect mode only applies when WLAN controller over the WAN right?
Most my implementations are local mode (Local WLAN) in that case i should continually recommend 2 controllers for reliability. Any thoughts?
Thanks,
Kumaran
Sorry if I confused with my question I’m aware that we can convert LAP to IOS but my question does Cisco has hardware specification for 2700 serious IOS access points? One of my customer wants IOS access point but I couldn’t find the hardware specifi...
