About jskalli

jskalli · 06-14-2007

Hi,I can't seem to get the caller-id when i make a call from the E1 (PBX) to the voip sip network. With this IOS version "c2430-is-mz.124-13.bin", I can't find the commands " caller-id enable" and "station-id number".Here is the config attached.On th...

jskalli · 04-11-2007

Hi,I have a client who is having some issues with their VoIP LAN and WAN network. Do you guys know about some good tool that can monitor the network for VoIP issues?Thanks.

jskalli · 12-27-2006

Hi,I am trying to configure EAP-Fast and I couldn't find any documentation on this. Basically, I would like to configure wireless clients to authenticate using wpa1+wpa2 and EAP-Fast from an access-point through a WLC to the local database of an ACS...

jskalli · 06-14-2007

I told this to the operator but then he used a sip phone and called me and the number was showing. So I don't understand. I will send the telco the debug ccsip output for analysis.

jskalli · 06-14-2007

I did a debug ccsip and got the following output but the number doesn't show on the called phone from the operator. This is a connection sip to the operator.As you can see from the sip messages, there is always the anonymous keyword.INVITE sip:06142...

jskalli · 06-14-2007

I have tried to upgrade to 12.4(13b) but it crashed the router. There has to be a way of doing this with the IOS in place which is 12.4(13).

jskalli · 06-14-2007

Can we find a way to do this without doing a downgrade since I am using a version that is newer: 12.4.13.

jskalli · 04-11-2007

Thanks for your reply. Any other suggestions?Regards.

Member Since	‎01-09-2006 08:27 AM
Date Last Visited	‎11-13-2019 01:20 AM
Posts	22

User Statistics

User Activity

Caller-id trouble on IAD 2431

Monitoring Tool for VoIP

EAP-FAST Configuration WLC + ACS

Re: Caller-id trouble on IAD 2431

Re: Caller-id trouble on IAD 2431

Re: Caller-id trouble on IAD 2431

Re: Caller-id trouble on IAD 2431

Re: Monitoring Tool for VoIP