Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, We are planning an installation of CME. I hope to have at T1 that will consolidate multiple inbound phone numbers and terminate it on the CME router. I would then like to have all inbound calls forwarded to a single reception phone who can ...
Currently runninig 6509 with dual supII and MSFC2. CatOS 7.61 and 12.18b on MSFC. We will be implementing high availability and config sync on device and we are looking for recommendations for software versions before configurations changes. Thank...
I have the task of upgradeing a couple of pix 515 firewalls in failover mode from OS version 5.1 to 6.3X. I have looked for a best practice procedure for this but have not found one. Here is what I am thinking:1. shut down primary, let secondary tak...
Hello everyone,Here are my two questions. We have a Unity 3.1 server that was our first server installed in the network. It is an AD DC. We are going to upgrade this box to 4.0x and the first step I would like to acomplish is demote it to a member...
Thank you, I was relying on the e-mail update to inform me of a reply to my post. That didn't work quite right. So it appears that everything I was hoping for in CME is there.Just to make sure, even though the 7940 only has two buttons, all the inb...
Thanks for the info on the GCatalogs. We have 2 other DC's with copies of the GC. As for our hardware, we have a MCS7825 74-2611-01US that shipped with a single 20GB IDE. We have hopes of adding some redundancy with larger mirrored drives. We hav...
