I am incredibly frustrated by what should be an easy task. I have an ACS 3.2, and want to use PEAP for wireless client authentication, but have gotten nowhere despite:1. Purchasing a "WLAN" certificate from Verisign (installed in IE, untouchable in ...
My situation is that I have a PIX 501 at home that I want to set up a VPN between my office and home. However, the firewall at my office is blocking IPsec from being established (it is blocking the TCP and UDP ports of IPsec). I could ask our firew...
Hi, allGiven: Networks A, B, and C are learned via an IGP.Goal: I want BGP to summarize A, B, and C as D, and advertise D to its peers. Restriction: BGP is to only advertise D if A, B, and C are all present in the routing table. If any one of A,...
How do you properly do this? Given: alias (inside) 1.1.1.1 2.2.2.2 255.255.255.255where 1.1.1.1 is the outside addressand 2.2.2.2 is the DMZ addresswhat is the equivilent static command? static (inside, dmz) 2.2.2.2 1.1.1.1 dnsDo I need tw...
The PIX at my office location does NOT allow me to pass UDP 500 traffic, so the VPN client never gets past ISAKMP negotiation. Merely changing it at the client does not help; it only changes the TCP port that the client will attempt to connect to ...
The results that I am getting so far is that 3.6.x does not support DES period. I am currently struggling with getting 3.6.3 client to work with an IOS based IPsec configuration and it can not get past the IKE negotiation stage because they never ag...
