Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,is the Cisco Advisor still usable?When i try to login with my credentials, which are working on cisco.com, I can't login on https://ciscoactiveadvisor.com/ Also the links on that page for "Forgot your password" or "Create an Account" are not worki...
Hello,quick question about that "config ap dhcp release-override" command.Doest it appear in the run-config on the WLC after configuring it?At least in my case it can't find it.So i wonder, how i can verify if this option already has been configured?...
Hello,we are using 802.1x to authenticate our Clients.As a fallback and for foreign devices we are using MAB.Now we often met the issue, that also MAB is not working.The authentication session does not start at all and there is no MAC Address visible...
Hi,is it possible to connect clients via on Interface to different VLANs when using 802.1x multi-auth?Example:Interface Gi1/0/1 (all clients connected to the same port)Client 1 - VLAN 11Client 2 - VLAN 12Client 3 - VLAN 13 Tried to check the document...
Hi,i'm not able to login to my CCO Account using CLI Analyzer.I guess it's related to enabling of 2FA for CCO Login on cisco.com. Is this realy a problem?Will this be implemented in future? Best regardsStefan
Hi,quite old post, but we are facing the same question currently.CONAN Temperature in warning level, all other temperatures are fine. So i assume it's not an problem of the temperatur in the room or something.What does that mean and how can we fix it...
Got a Feedback from Cisco Support.The login is only working with the CCOID which can be found here, at the bottom left on this Portal:https://id.cisco.com/ui/v1.0/profile-ui/personal
Hi MHM Cisco World, wow. Thanks for your great analysis.I'm not sure if this definitly will be the reson, but will keep in mind and check.Till now we met this issue on different plattforms (C9300, 2960x C4506-E) and different types of devices (e.g. a...
Hello, thanks for your feedback.I can try this aswell, but if there would be any authentication starting, i should see it in the logging or with "sh authen session interface" command. But that's not the case. So why it should start the mab when he is...
Hi Panos,thanks for your feedback and your tipps.Was not aware of the mentioned command, will definitly try it.But it's confusing, as i see the mac address right after removing the authentication.Doesn't that mean, that the device is sending packets?...
