Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have an FTD 1120 managed by FMC,topology; I have 4 internet feeds going into the firewall (migrating down to 2) with multiple VRF'sProblem: i created a new VRF and added a leaked route to one of the internet feeds however I get the below error, ...
Hi there,Does anyone know what the expected action is when using Secure Client and where public DNS serves multiple IP addresses for the headend in a single DNS response, as opposed to round-robbin?e.g vpn.contoso.com returns [1.2.3.4], [5.6.7.8]
Hi I have a 9800 WLC with a number of 9120 AP's. My question is if I configure an SSID with PSK, and egress that traffic locally using a flex policy, IF the wireless controller and the AP lose connectivity the clients connected to the SSID still work...
Hi I have a HA part of 9800 WLC's on vmware and for some reason, they keep rebooting and failing over, from what I can see through our monitoring there are no network events to cause the failover, any ideas? I've seen mentions of a keep-alive but I c...
HiI have an FTD managed by FMC and I need help with a NAT rule please,I need a client's DNS request to be translated into a pool of IP addresses before it gets translated into our public IP.Can this be done with a single rule or will I have to use mu...
All 4 internet feeds belong to global, however despite the route to 0.0.0.0/0 via the "bt-Civic" interface from the global vrf, traffic is still trying to egress via Zen-Civic interface via "sub-optimal routing" when i do a packet trace,
Hi,I changed one of the default routes in global from a metric of 1 to 2, after this I was able to add a default route in the new VRF, however.... something wired is happening, traffic is trying to egress out of an interface not in the VRF at all, co...
Thank you, however, what is the expected behaviour if I don't use round-robin? and just serve multiple IP's for a single record in the event that one of the returned IP addresses does not result in a successful connection. I use an azure traffic mana...
Hi,Just so i'm clear the wireless management interface (currently on vlan 657) needs to match the vlan used on the redun-management interface (currently 1657) ?I though the HA interfaces needed to be on their own vlan, I didn't realise management mus...
