Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have several WS-C3750X-48T-S switches as spares. I need to replace a failed switch which is running c3750e-universalk9-mz.152-2.E5.bin. The replacement switches repeatedly fail in the IOS upgrade process from 122-55, 122-58, or 150.2. Is there a tr...
I had a full demonstration license for ISE 2.0. Then I installed a permanent Base 100 license and a permanent Device Administration license for the ISE. My TACACS+ and RADIUS AAA works (network device polices grant AAA) but the Live-log displays to a...
I have an enterprise wide network with ASA 5545s. I need to centrally mange those devices. What tools are available from Cisco?
The systems needs to be releasable to NATO.
Does Cisco FireSIGHT Management Center work?
yes.I did all that (several times) but it still fails at the new IOS load process @@@@@@@@@@@@@@. If I clear out all excess flash: and there there is no backup IOS in flash: ---- we are dead and I have to resort to an XMODEM upload of an IOS that wil...
I have attempted to perform the IOS upgrade in two different ways. (1) By TFTP of the *.bin file into the flash:\ (root) directory and creating a new [boot system flash:/*.bin] setting, and (2) by running the "archive download-sw" command and having ...
Krishnan, We also have the Device Admin license for the TACACS. We did have the full demonstration license running while I developed all my policies and was used to seeing Livelogs for both RADIUS and TACACS for debug. However, when the demonstratio...
For truncks that are in between two Cisco 3750 switches, is there a way to do the same thing?sample switch config:interface FastEthernet1/0/33 description Trunk Connection via IPSEC INE switchport trunk encapsulation dot1q switchport trunk allowed vl...
