%ARP-3-REQ_NON_AM: arp getting this log on my nexus contineously , we have recetly reboot the switch , running with version 7.1(4)N1(1) IOS Version just wanted to understand is there any impact due to this ?
Hi we have Catalyst 4507R switch with 2 SUP V modules in slots 1 and 2 . These switches are placed in the Access layer . We have a 2 Cat 6509 switches at Core . Currently we have Cat 4507R Uplinks connected to core in this manner .4500 1/1 --->...
Present setup We are having 2 DS3 circuits from India to US. One DS3 from India to Alpharetta and another DS3 from India to Cincinnati. Presently, whenever ether of DS3 links goes down the other will handle the voice and data traffic. Proposed setup...
Hi Guislar,Thanks for the reply .So as you said we can move one cable on the Active SUP port which is not in STP forwarding state to the Standby SUP port 2/1 .After doing that the interface 2/1 would show up or it will remain in the down state only ...
The destination mirrored interface traffic can be viewed using a Sniffer . The destination interface to which the monitoring machine is connected will show the Line protocol down but still u can see incoming traffic coming onto the interface as input...
