About 7benjamin7

7benjamin7 · 10-23-2019

I've tried searching google and haven't found anything. What is the transfer output trying to tell me with a ! or a . ? Receiving asa-fp1k.9.13.1.SPA from 10.1.1.1!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...

7benjamin7 · 10-22-2019

Trying to implement a SSL cert for the web server on a Firepower 1010.Not managed by a FMC (yet). Still in Testing/R&D phase. I'm not using a known/trusted certificate authority. I have my own CA cert, generated locally, distributed locally, then use...

7benjamin7 · 07-05-2019

Something seems backwards here, or i'm just not understanding the statistics.I'm using a configured service, SIPConfigured a class: Created a wan queue: (ignore "applied to", screenshot says none, but it really is applied to wan interface. I created ...

7benjamin7 · 06-18-2019

I've tried turning it on but now want to disable it and configure port 8 as something else.Every time I try, the option is greyed out. is this a bug in the guy config?

7benjamin7 · 11-05-2019

I suppose if I would have just read the tftp rfc right away, I maybe could have found that.I new tftp used UDP but assumed because it uses UDP, it didn't use acknowledgements. Thanks

7benjamin7 · 07-05-2019

ah, i'm foolish. the answer was staring me in the face.I have a disabled rule in the ACL that references the DMZ interface.Disabling the rule is not enough. needed to remove the rule, then i can disable the hardware dmz

Member Since	‎04-04-2016 08:16 AM
Date Last Visited	‎11-05-2019 11:15 PM
Posts	7

User Statistics

User Activity

TFTP transfer ! or .

Firepower 1010: Management Web Server Certificate

RV260 and qos

rv260 can not disable hardware dmz

Re: TFTP transfer ! or .

Re: rv260 can not disable hardware dmz