Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a (single) client (it is a cisco IOS router) behind a wireless workgroup bridge (cisco1242).The client's IP address is obtained via DHCP from the wired network.Now, when roaming occurs, the Client will never have knowledge about this ev...
I have a pair of Nexus 7k configured for virtual port-channel (with domain, peer-links, pkal, etc.)I have three Nexus 5k switches dowstream, that I want to connect to both 7k using vPC.From the documentation I understand that I must use port-channels...
I have cisco VPN client 4.6 on WinXP and the server is IOS easy vpn server (12.4T). Everything works fine with pre-shared keys, but when I try to use certificates for IKE authentication the VPN client never connects.In its log I always see the follow...
I have a router (cat3750) in an OSPF normal area that is not an ABR/ASBR.This router has multiple stub networks directly connected to it,all having IPs 10.10.x.0/24. The router will source one LSA 1 foreach stub /24 network connected. However, with t...
Cat6509 has both ethernets and atm modules installed.I can successfully monitor (via NAM/Traffic Director) all ethernet ports/vlans, but neither atmports nor virtual int of MSFC appear in the list ofports discovered on the switch. E.g., when roving f...
Yes, George, I've looked at this.The problem with dynamic anchoring with static IP address is howthe (new) WLC detects the IP address of the client. Remember thatmy client is cisco router with network(s) behind it. Snooping theARP request will not wo...
Thank you for your comment, David, but no -- setting DHCP required on WLC will notforce a client to renew its IP; it'll simply block its traffic until the DHCPREQUEST is heard.And it won't be heard until lease expiers.Actually, I have found (and have...
Thank you Allan.In fact the answer to my question is: Both possible.-- Separate downstream port-channel (and vpc) per each attached device (as you propose).-- And common downstream port-channel (and vpc) for a pair of attached N5k on conditionthis pa...
Thank you Harold.The interesting question which arises is: Why cisco IOS does not permit overlapping addressing on Loopback?Within the routing paradigm "More specific route first" I would not see any problem with doing that.E.g., 10.10.10.0 /24 conne...
