Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a Raspberry Pi connected to a MS switch in its own Vlan and for the some reason I cannot connect or even ping the device remotely. I have set up 1to 1 Nat from my Public IP but still no joy. Any help much appreciated
Hi there,I am looking for a solution to this issue; I have set up a Corporate SSID for new remote users. They gain access via a PSK only (No radius involved etc). However, how do I set up a prompt/alert that the password needs changing after 90 days....
Hi there,I am looking for recommendations for AP's for Underground car park of a building. Currently, all other floors have APs and confirgured by WLC 5500. I am not sure what APs are EOL regarding the 5500 WLC. Also, what do I need to have in place ...
Hi there,I have created a test network. Essentially, 1 SSID (10.10.10.0/24) I have only a laptop and a printer connected via the AP. So Wirelessly connected to the same SSID and I cannot print anything. I have tried pinging the printer from laptop an...
Hi there,We have a bunch of system Certificates expiring ASAP in a PAN failover depoyment (Primary & Secondary)Can you aid in the correct steps to carry out this work. Can you actually import the new certs whilst the others are active and then just d...
Hi there,Many thanks for that script. I am not familiar with implementing them at all and quite noobie regarding API configuration etc.Is this the only other way this can be done? Can you walk me through it
Hi all,Many thanks for the feedback. The WLC is a 5520 (AIR-CT5520-K9) software version 8.5.135.0. Current AP's are AIR-CAP27.The current licence on WLC is for adder license with 300 and only 100 being used at present. I will carry out a full survey ...
