Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am restoring a CUCM Publisher using DRS for a redundant cold standby. The existing Publisher is an MCS 7825 running ver 5.1.3 (upgraded from 5.1.2b). The new hardware is the same MCS 7825. I built the 2nd publisher to 5.1.2b with all the same in...
Hi there,I would like to use SLB to provide Extension Mobility redundancy in CUCM 6.1 as per the URLhttp://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008097cd93.shtmlDoes anyone have any sample configs for the SLB part plea...
Hi, I have a 3845 with IOS 12.4(11)T1 (needs this IOS for CME).I am attempting to do simple redundancy on the gigabit ethernet by setting G0/1 as a backup interface to G0/0 using "backup interface G0/1" on G0/0.All is working fine apart from one prob...
Hi there,I need to implement simple MAC address filtering on an 877. I have a config from an 837 where it used a bridged interface BVI and attached a MAC filter to it. It then assigned the ethernet0 interface to brige group 1.The 877's have a VLAN in...
Hi,I have a very simple questions that I need a definite answer to. We have a customer with a VPN 3000 concentrator. They have reported that traffic will not travel spoke to spoke ie between VPN end points.I am aware that this is not possible on a PI...
Hi, I am trying to get phone proxy working with 4.2. I can find te Cisco_Manufacturing_CA but there is no CAP_RTP_001 and CAP_RTP_02 on our 4.2 CCM server. Are you saying I can use the certificates from another UCM such as Ver 6?ThanksDavid Stevens
Hi Fabian,Thanks. We actually found the same too and got it working last week (sorry I did not reply). Your mentioning of the DNS issue set us on the right track.I did log a TAC case and they told me that the reason was because I was trying to restor...
Hi Fabian,Intersting. My DNS servers are also not available - is that what they think is the issue?I have also opened a TAC case but spoken to anyone yet. Will also keep you postedDavid
Hi Chris,Thanks for the quick response. The backup box has it's own license registered to it's own MAC address.It is not actually a standby Publisher - more of a test one. It is for a test environment. A node license and some device licenses were pur...
Hi Fabian and others,I too have exactly the same problem. I am restoring a CUCM Publisher using DRS for a redundant cold standby. The existing Publisher is an MCS 7825 running ver 5.1.3 (upgraded from 5.1.2b). The new hardware is the same MCS 7825. ...
