About bertrandc

bertrandc · 12-09-2010

Hi all,I need to establish a tunnel between 2 Routers / switchFor the test, I've established a tunnel between 2 3560 switches (3560-ipservicesk9-mz.122-55.SE.bin)Here's the configSW1 :interface Tunnel0 description tunnel vers OTT ip address 10.0.0.2 ...

bertrandc · 02-16-2009

Hi all,I've got 7940 phones.I've alredy converted some to P0S3-08-11-00 of the SIP kernell. (I can go ton any other version whithout any problem)It works fine but in english, and I need to convert them in french.In The settings, Localization (7), It ...

bertrandc · 12-13-2010

Hi,If you mean setting an IP like 10.110.59.2/24 to a router and 10.110.63.2 to another and define the route between each other, it's what I've test first.The problem is than the source IP in the packet stays 192.168.X.X so the packet is dropped by t...

bertrandc · 12-13-2010

Hello,I don't realy know what a point-to-point l3 vlan is.Could you give me an example ?Thanks

bertrandc · 12-10-2010

Ok,So it is normal...Any others idea for interconnect 2 remote sites with VLAN and cisco telephony on the main site ?The ISP who interconnect my sites can route only 1 type of address (10.110.X.X) and my sites are in 192.168.X.X

bertrandc · 12-09-2010

yes,3 switch directly connected,2 macines each one on its switchand the problem stays with ftpthanks

bertrandc · 12-09-2010

Ok, thanks for the quick answer, I didn't know about icmp traffic.At the origin, my test was by ftp, and I got strange behavior :Sometimes, transfer speed at 10.5 MB, sometimes 1.5MB and lot of times between these two.So I made the test ping.

Member Since	‎02-16-2009 03:48 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

Tunnel latency on 3560

phone 7940 in SIP in French

Re: Tunnel latency on 3560

Re: Tunnel latency on 3560

Re: Tunnel latency on 3560

Re: Tunnel latency on 3560

Re: Tunnel latency on 3560