Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Wanna ask about the WLC and AP which connected to Switch with trunk, while i implement the dhcp snooping is it i need to trust the port which connected to WLC and AP.another thing is if the dhcp server is setup in blade server, the switch there is...
Hi expert,I have the scenario as the diagram:I want the 192.168.1.50 IP nat to 200.200.200.10 which for network B with the H323 packet,As what i know there is the Payload problem for the H323 and been recommend me use the NAT with ALG.May i know mo...
Hi,I;m configuring the Remote Access vpn on the Pix 515 with version 8.0(4)Licensed features for this platform:Maximum Physical Interfaces : 6 Maximum VLANs : 25 Inside Hosts : Unlimited Failover ...
Hi,my Topology as below :Host1------>FW1<-------------------->FW2------->Host 2 Default RouteMy FW 1and FW 2 are back to back connect and both site already configure default route to point each other, however i unable ...
Hi all,My 6509E Chasis cannot detect the all the line card except the ws-x6k-sup2-2ge. It is running hybrid which Cat0S on layer 2 and IOS at Layer 3.The more detail log is in the attachment.is it this problem is because the CATOS version cannot supp...
