I am trying to connect Nexus 5k to nexus 9k over a fiber link. This is a single Port channel VPC with 1 interface in the Po. The CDP is up, but one of Port channel remains in BLK state and we are getting below logs :log: STP-2-BRIDGE_ASSURANCE_BLOCK:...
Can we allow multiple tcp ports in named extended ACL in Nexus 3k?something like: 15 permit tcp x.x.x.x/32 x.x.x.x/x eq 22 443or we need separate lines of the config for each service?
multiple users are unable to connect to wifi network. Meraki dashboard shows authentication and association failures for the SSID in question. what could be the issue for 802.1x authentication with Radius?
Hello ,Can we configure Jumbo MTU on SVIs in Cisco 2960? I have changed the system jumbo MTU to 9188 bytes, but that only works for the Gig Interfaces, the SVIs are still on 1500 bytes. Is there a way to change Routing MTU to Jumbo in 2960?
yes on my both switches Spanning tree Bridge assurance is globally configured and we tried to configure "spanning tree port type normal " and "spanning tree port type network" on both ends but still one of the interface ends up in spanning tree block...
Hi @ammahend , pls find below: has this ever worked before ? when did the problem start ? what changed ?yes this has been working fine since years, the problem suddenly started last weekwhat radius server you are using ? can you share radius logs ? w...