About jswm_mm01

jswm_mm01 · 05-07-2024

Hi everyone.We currently use Cisco Jabber 14 on our CUCM 14 installation and have a light integration with our CRM system where all phonenumbers are created with a hyperlink that uses the ciscotel protocol prefix. So e.g. ciscotel://1234 which will c...

jswm_mm01 · 01-06-2020

First of all, I'm far from an expert so bare with me if my questions seems ordinary :-) We have 10 offices in Europe with a central CUCM 11 and local ISR 4321/4331 gateways running IOS XE 15.5 (or so I believe - an sh run returns version 15.5 in the ...

jswm_mm01 · 05-08-2024

Hi Shalid.Thank you for your answer. However when I do this here WebEx prompts me if I'd like to call 123 and that's no matter which protocol I prefix the number with (see example below).With our Cisco Jabber today we get the same prompt if we prefix...

jswm_mm01 · 01-12-2020

Hi Nuno.I've now upgraded to 16.9 and are therefore able to use tenants, which seems to have helped a lot after I've altered our config to use tenants (the upgrade alone didn't do it - we had to use tenants to get it to work).We now send the INVITE o...

jswm_mm01 · 01-10-2020

Hi Nuno.That sound odd because how can you register the sip-trunk without a register request - are you running in static mode by any chance?Cisco TAC has asked us to upgrade the IOS to a version that supports tenants - will try to do so during the we...

jswm_mm01 · 01-08-2020

Hi Nuno. I don't know if it's related to my version of IOS but when I use reg.sip-trunk.telekom.de as proxy and sip-trunk.telekom.de as registrar and sip-server, then no REGISTER is sent. And I can see from my package trace that first it tries to res...

jswm_mm01 · 01-08-2020

Hi Nuno. Thank you for sharing the config. One question: You have dns:sip-trunk.telekom.de listed as the sip-server and also on registrar. How do you resolve this DNS wise since I cannot resolve it to anything (no SRV or A record)? With regards,Marti...

Member Since	‎01-06-2020 05:24 AM
Date Last Visited	‎05-08-2024 12:01 AM
Posts	12

User Statistics

User Activity

Does WebEx have a procotol that works like ciscotel in Cisco Jabber?

Cannot get connection-reuse to work on SIP-trunk - REGISTER and INVITE are still transmitted on seperate ports

Re: Does WebEx have a procotol that works like ciscotel in Cisco Jabbe

Re: Cannot get connection-reuse to work on SIP-trunk - REGISTER and INVITE are still transmitted on seperate ports

Re: Cannot get connection-reuse to work on SIP-trunk - REGISTER and INVITE are still transmitted on seperate ports

Re: Cannot get connection-reuse to work on SIP-trunk - REGISTER and INVITE are still transmitted on seperate ports

Re: Cannot get connection-reuse to work on SIP-trunk - REGISTER and INVITE are still transmitted on seperate ports