Greetings, thanks for reading. I have NetApp storage attached to Nexus 5k for the FCoE zoning and SAN boot and then to ACI.We simply removed those connections to the 5k and instead directly attached to the Fabric Interconnects and went from twinax to...
I can't find any trouble shooting steps online the event itself suggests creating a TAC case which appears to be the troubleshooting solution for almost every event unfortunately. We do have apps installed though so it was working at one point.
Not sure if the /bin full is causing the app not to install but I ran df -h to see the /bin folder is at 100%. How do I know which files to delete from here or can I do it in the GUI?df-hls -lS /dev/vg_ifc0/boot
Easy question for any datacenter certified engineers. Does anyone know of any workbooks that can guide me through these labs including MP-VXLAN EVPN etc, perhaps using virtual 9ks over cloudmylab/CML or something?Thanks
I've never worked anywhere in multiple theaters abroad that use MDS switches. Is it deprecated?I noticed Cisco dumped it from their concentration exam. Did direct attached storage via the FI's take over? I just feel like I'm wasting my time. Any thou...
Genious, thanks for that. We also noticed we needed break out cables because it's a 6332 which is 40GB ports going to a 10GB port. We used the QSFP to SFP adapters so I guess that FI doesn't drop the speed automatically.
Also, 3 steps to fix the app issue which was separate than the space issue. CSCvy79309 Podman db corruption.1) acidiag scheduler disable 2) acidiag scheduler cleanup force 3) acidiag scheduler enable
Ok thanks, the reboot lasts a few weeks before filling up again. Can you show me where in the filesystem I can verify the state log files to ensure they clear? I've read the APIC CLI user guide but has little to nothing regarding the filesystem proce...
Thanks Robert, Ver 5.2(7g) path below. Any advice? I'm told reboots fix the issue but it comes back eventually. Is acidiag touch clean a common solution or are there less drastic methods?
