Hi All   I am getting error unable to save export file in Cisco license Count Utility -- log file showing Access is Denied... I have checked there is no firewall between the CUCM and LCU. Anyone can help to resolve this issue.     ... View more

Dears We have 2xPRI lines configured with 2x Voice Gateway and we have 3 digits extensions running fine. Now we are having another PRI line and going to configure new voice gateway for 4 digits extension. Now need to convert all existing 3 digits extensions to 4 digits. Could anyone have any idea about to convert the 3 digits ext to 4 digits. we are having 900 extensions. Thanks ... View more

Dear All I have configured Microsoft Lync Clients and integrated with Cisco CUCM. All the Local extensions call landing to Lync Client. But when somebody calling from outside so its not landing to Lync Clinet. Can anybody suggest what i have to do for incoming calls to land both Cisco IP Phones ( Currently Calls are landed only Cisco IP Phones ) and Lync Client. Thanks ... View more

HI All If i want to add New extension range on call Manager so should i only creat partition and CSS for that OR i have to add that extension range anywhere else. Example : We have existing extension range from 501 --> 599 and now i want to add new extension range from 3001 --->3999. Sould i add new extension anywhere or  just add new extension i.e 3001 and add the new partition and CSS on that. Please advice. Thanks ... View more

Hi All I have created two different extensions  ( i.e 2XXX and 5XX ) on Call manager. What i have to do on Call Manager Setting to configure the route pattern for both extensions. Thanks ... View more

Dear All I have configured SSL VPN ( Webvpn) on cisco router C2900. After configuring i m atrying to access my Gateway IP but i am unable to access on https port. when i am trying to access the Gateway IP its not showing me any login credential page. the Gateway and webvpn context is inservice. Please advice. Thanks ... View more

Hi We have configured ASA 5510. We have configure Ethernet 0/0 ( Outside ) connected with ADSL line and Ethernet 0/1 ( Inside ) Local LAN. we have configured NAT and all the traffic is passing through outside interface. Now we have connected ethernet 0/3 ( leasedline ) interface with static public IP. Now we want to allow  SMTP traffic to pass through  from this interface. How to configure it if we want our local lan SMTP traffic sending through new leasedline ( Static Public IP ). Thanks ... View more

hi all, we have two clarifications for deploying cisco 3750 switches with Juniper UAC/4500: 1) the design will be centralized Juniper NAC in the HO with 802.1 x switches depoyed in all branches. users in all branches have to authenticate against that UAC over layer 3 WAN. is there any command/features to enable local authentication option of Cisco 3750 switches in case of WAN outage to not end with an isolated network. this option is availbable of Juniper EX switches: http://kb.juniper.net/InfoCenter/index?page=content&id=KB19402&actp=LIST_RECENT&smlogin=true 2) Guest Layer 2 Enforcement of the Juniper NAC  for guest users will be through agentless mode. it require to redirect the 802.1x AP/Switches guests users assigned by different SSID and mapped to a different VLAN on that switch to be redirected to a capative portal (web browser) to sumbit their credentails. is capative portal Cisco 3750 switches/AP when it is deployed with Juniper UAC4500??any contraints/requirements? thanks for your help, ... View more

hi all, we have two clarifications for deploying cisco 3750 switches with Juniper UAC/4500: 1) the design will be centralized Juniper NAC in the HO with 802.1 x switches depoyed in all branches. users in all branches have to authenticate against that UAC over layer 3 WAN. is there any command/features to enable local authentication option of Cisco 3750 switches in case of WAN outage to not end with an isolated network. this option is availbable of Juniper EX switches: http://kb.juniper.net/InfoCenter/index?page=content&id=KB19402&actp=LIST_RECENT&smlogin=true 2) Guest Layer 2 Enforcement of the Juniper NAC  for guest users will be through agentless mode. it require to redirect the 802.1x AP/Switches guests users assigned by different SSID and mapped to a different VLAN on that switch to be redirected to a capative portal (web browser) to sumbit their credentails. is capative portal Cisco 3750 switches/AP when it is deployed with Juniper UAC4500??any contraints/requirements? thanks for your help, ... View more

are Remote wireless  users and local user assigned to same SSID (each SSID is mapped to one Vlan and IP addresses ranges in the controller) considered to be actually on the same VLAN? if yes, how layer 2 broadcast messages are transmitted over layer 3 MPLS? ... View more