ATA- Getting "TCP connect err: -33"

[corliantindia]

In my setup, from G/w I am able to ping the ATA, but I am not able to make any outbound calls from the Analog phones ( not tried the inbound yet).

I ran prsrv.exe and found the following error

Connect to <0xdce08005 1720>..

12:00;0,0,0,0,

12:30;0,0,0,0,

TCP connect err: -33

SCC:ev=7[0:0] 3 0

[0]StartTone 2

According to the document on cisco site

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a0080094adf.shtml

it is a IP connectivity issue. But from G/w I am able to ping the ATA.

Can you suggest what problem it could be?

Regards..

[vmoopeung]

since you can ping from the gateway its not a connectvity issue with the router, may be your router is not properly configured to route the call out , check for the router configuration.

[corliantindia]

Thanks for the reply. It was IP address confict, which was creating the problem.