03-19-2006 09:51 AM
Dear experts ;
is there a way to manipulate the incoming CALLING id on INBOUND voip dial-peer via translation rules ?
Regards
03-21-2006 04:32 AM
Look for Configuring Digit Manipulation here:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvfpeers.htm
03-21-2006 07:54 AM
Hi!
Try "num-exp
Rgds,
Sri,
03-22-2006 12:01 AM
Hi, you can write voice translation rule and then apply under incoming peer.Doing in global mode will effect your all calls.
voice translation-rule 2
rule 1 /^0+$/ /1234/ type any national plan any national
rule 2 /^$/ /12345/ type any national plan any national
voice translation-profile test
translate calling 2
dial-peer voice 210 voip
desc incoming peer
translation-profile incoming test
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide