trouble adding second port BRI in a 2801 MGCP gateway

[proxitel]

my config is CCM 413 with a 2801 SRST including a VIC2-2BRI .

I have configured the 2801 as MGCP gateway on the CCM, added the module VIC2-2BRI and configured the BRI 0/0/0 in this gateway.

this BRI work properly with the PSTN . I can make successfull call inbound and outbound

Now I want to add the second BRI (ie BRI 0/0/1 ) in the gateway for the same hunt group, the same PSTN provider.

When I do that this BRI can't register and make different kind of problem on the existing well working BRI.

for example I noticed that I can make inbound or outbound call with connected state but no voice in the two way.

I noticed also that the first BRI become completely blocked after two call.

I have verified the conf of the BRI 0/0/1 but i don't see any difference with the BRI 0/0/0 .

the only way to get back good working of the BRI 0/0/0 is to remove BRI 0/0/1 from the gateway conf.

[KronosNOC]

Hi there,

I think that I have also the same problem at our location in Germany!

The same situation is appeared to us.

Can we share our config please?

Regards,

h2t

[proxitel]

in fact i have activated a TAC request and get a new bin for my 2801 ²c2801-spservicesk9-mz.124-4.4.T.bin²

Regards

[KronosNOC]

Hello,

That is a good news though. Can you please share to me the TAC case nr? So I can refer this to tAC. Because we have also opened a CASE for the same problem on the 3725 but not hear from TAC yet for the patch!

I got another image ie. IPVOICE version 12.4.1.9 from a friend that has the patch for this problem on the 2801 but there is no SPSERVICES image yet.

Now it looks that Cisco has a newer image.

Thanks in advance.

Regards

[proxitel]

hello,

my TAC service request number was 601940397

after that i found that my gateway don't arrive to play dtmf code to pstn and i got a new IOS for this .

not sure that we can have more than two BRI with this release.

good luck

regards