a problem with pickup in module expasion SPA500S

[Julio Saldivar]

I have a problem with the phone 502 and the module expansion SPA500S, these are registered to a SIP server in the  UDP port 5080 , everything works fine, unless pickup from the module expansion. when i check  the SIP packets, to perform the pickup send packet to port 5060 and not to port 5080.

configuration

proxy=10.0.10.1:5080

fnc=sd+cp+blf;sub=582@$PROXY

[nseto]

Instead of $PROXY, try making it explicit.  Put 10.0.10.1:5080 instead.