04-16-2010 12:08 PM - edited 03-21-2019 09:25 AM
Hello,
All of these questions are in relation to which tone is played with a certain tone ends due to how the cadence in configured in the SPA2102:
1. busy tone 480@-19,620@-19;10(.5/.5/1+2)
What tone does the ATA play after 10 seconds of busy tone?
2. ringing tone 440@-19,480@-13;60(2/4/1+2)
What tone does the ATA play after 60 seconds of ringing tone?
3. dial tone 350@-19,440@-19;10(*/0/1+2)
What tone does the ATA play after 10 seconds of dial tone?
Thanks,
Adam
04-22-2010 02:51 PM
04-22-2010 04:57 PM
Thanks Nelson, but this does not answer my questions. The main quesiton is what tone is played after the section length times out for each tone?
04-22-2010 05:02 PM
You can test this, I just had the phone off hook and got the dial tone for 10 seconds, then I got the reorder tone. You should be getting the same order of tones like a regular phone that goes off hook.
05-07-2010 11:17 AM
Thanks Nelson. So is the reorder tone also played after these tones timeout as well? Is the reorder tone played after all tones timeout?
1. busy tone 480@-19,620@-19;10(.5/.5/1+2)
What tone does the ATA play after 10 seconds of busy tone?
2. ringing tone 440@-19,480@-13;60(2/4/1+2)
What tone does the ATA play after 60 seconds of ringing tone?
05-11-2010 04:22 PM
It's supposed to match up with what you normally hear when using a phone connected to standard PSTN. If it's not, let me know and I can write it up for dev to address.
05-27-2010 03:58 PM
Thanks Nelson. If possible can you please ask your Dev?
05-27-2010 05:14 PM
I'm surprised that you didn't try this with the ata.
I just tried it and what I get after the busy tone times out, I hear the busy sound twice as fast, which matches up to reorder tone and then shortly after, I hear the off hook tone.
After the ring back tone times out, I get the busy tone.
06-01-2010 01:25 PM
Thanks Nelson.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide