06-02-2009 09:25 AM - edited 03-21-2019 01:09 AM
We are getting CallerID phone numbers but we are not able to get the actual names of the callers to show up on our phones.
We have a mix of 7975 and 7942's in our environment with a UC520.
Any help would be greatly appreciated.
06-02-2009 09:39 AM
Are these calls coming in over FXO, BRI, PRI, or SIP? We will need to look at debugs to see what is going on to make suggestions. Also, what is the call flow for these calls? Do they go to AA first?
06-02-2009 09:41 AM
All calls come in via PRI and the call flow goes through an AA first.
What debugs would we need to see and I can see about getting those.
Sean
06-02-2009 10:49 AM
Does the calling name show up if it rings a phone first instead of going through AA?
If the answer is no, try putting this under the serial interface.
isdn supp-service name calling That is for when a name comes in the facility IE on the PRI.
The debugs to turn are simple for this.
debug isdn q931 (don't leave this on very long)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide