08-21-2018 04:57 AM
Hello,
I purchased a cisco UC560 with bri and wanted to know how to set up a sip trunk.
Thank you
08-24-2018 06:24 AM - edited 08-24-2018 06:25 AM
Hello Valente.13,
Do you plan to use the Cisco Configuration Assistant (CCA) for configuring your UC560 or the command line?
The CCA, although not being supported anymore, like the UC560 as well, can still be downloaded here: https://software.cisco.com/download/home/281010085/type/281161599/release/3.2%25283%2529
It has nice and very intuitive GUI and admin guide as well.
Here is a step-by-step guide: https://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=7f8fd7feacbb4f308ca44529ad6561d4_Configuring_Generic_SIP_Trunk_on_UC500_Series.xml&pid=2&converted=0
If you plan to configure it via CLI - the UC560 is with CME 8.6 actually, so commands will be the same like for the CME.
08-27-2018 02:26 AM - edited 09-24-2018 06:54 AM
Thank you for your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide