Hi,
I've just configure some devices for transfer extension number from PABX KX-TA308 to my Office in brach location. I'm using Cisco SPA8800, SPA112, and Panasonic KX-TA308. The following is my topology :
Panasonic KX-TA308 (in main office) >>> Cisco SPA8800 (in main office) >>> Cisco SPA112 (in branch location)
And when i make calls from SPA112 to number extension in main office it can't. But, when i make calls from main office (with analog phone that direct connect to PABX extension port) to branch location with press 108 extension number it's getting well and i can talk without touble.
Panasonic KX-TA308
- 3 CO ports
- 16 extension ports
- port 8 extension was assigned for Line 1 Cisco SPA8800, so SPA8800 is 108 extension number
Cisco SPA8800
- IP Address : 192.168.110.28
- Line 1 direct connect to port 8 PABX
Cisco SPA112
- IP Address : 192.168.110.26
- Phone 1 direct connect to analog phone
So, i have trouble for Outgoing Call in branch side. Please help me...
Thank you...
