08-18-2010 01:36 AM - edited 03-21-2019 02:53 AM
Hi,
Please i need help. I bought SPA 900 series for use in an office with a UC520 device, i just found out that the UC520 does not support the SPA 900 series phones, i dont know what to do.
Does anyone have any suggestions? Can i use ATA to adapt them to the UC520 device. Please helpppppp!!!!!!!!!!!!!!!.
08-18-2010 11:47 AM
Sorry to be the bearer of bad news but you will need to get either 7900 or SPA500 series phones. SIP phones will also work with the UC520, but you won't get all the features and limited support from Cisco.
Cole
08-20-2010 05:19 AM
This is really bad news. That means i have to buy new phones, what happens to the SPA 900 series phones? Please how to i get it to work with the uc520 even if i get limited features?
Thanks Cole.
08-20-2010 06:25 AM
The Official Cisco Position is not supported.
These phones date back from the Sipura acquisition and have lived a useful life in LVS deployments and hosted environments, and still can be used that way.
If you want to move to UC500 the story hasnt changed since 2007, which is only Cisco 79xx phones (CP-5xx which are EOS/EOL) and our new SPA5xx phones are supported. While the SPA5xx can run SIP or a tokenized version of SCCP we call SPCP (reference https://supportforums.cisco.com/docs/DOC-9551), we only support them on UC500 running SPCP.
Note to buyer: This means the SPA5xx phones can not be used on ISR based CUCME or higher end Communications Manager.
here is a nice comparison you can work from.
Before you invest in SPA5xx phones, make sure you understand the limitations of them as compared to 79xx.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide