SPA112 Australian Fax Configuration.Ddjust send and receive levels.Telstra Fax Test shows Send level too high

[stephen.trent@bigpond.com]

I have adjusted the levels in the ATA but it makes no difference.

[Iliya Gatsev]

Hi, My name is Iliya Gatsev from Cisco Technical Support Team.

Please open a case with Cisco Technical Support. Here is the contact of the technical support :

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Iliya Gatsev
Cisco TAC Network Engineer
Together we are the human network .:|:.:|:. CISCO

[stephen.trent@bigpond.com]

I followed the link and rang Cisco Tech support (Australia) on 1800605731.

The respondant had a great difficulty in understanding me and asked me to spell everything phonetically. After approx 8 minutes he hung up me.

I will try again early in the new year.

 

Re: SPA112 Australian Fax Configuration.Ddjust send and receive levels.Telstra Fax Test shows Send level too high

Hi, My name is Iliya Gatsev from Cisco Technical Support Team.

Please open a case with Cisco Technical Support. Here is the contact of the technical support :

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html