11-15-2012 04:06 AM - edited 03-21-2019 06:37 AM
HI!
My SPA303 stuck into forever rebooting:
1) It's starts, light are flashing
2) Cisco Logo
3) Initializing Network
4) Checking DNS
5) Reboot and all the same from №1 position.
So i'm not able restore factory settings from menu just beacuse i have no time to do that.
I think there must way to hard reset phone to default settings without menu system.
Please help me.
11-16-2012 10:25 AM
It sounds like the network cable is still connnected, can you disconnect that and have just the power connected? Then see if you can get into the menu?
11-17-2012 01:54 AM
I've got same result with plugged and unplugged network cable.
Still reboots.
11-19-2012 02:32 AM
When you have the Initializing network screen, you should have time to access the phone menu (at least if you use dhcp).
Do you have a BMP picture loaded in the screen?
If so, it could be our problem... https://supportforums.cisco.com/message/3786793#3786793
Let me know, because I'm going crazy about this!
Regards
Alberto
11-19-2012 03:36 AM
i'm trying to access - but initizlizing network takes not more than 1 second.i've tryed to push menu button - that doesn't help
is thete any ways to reset phone without menu?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide